|Written by Howard Lamey and Paul Race for |
Big Indoor Trains™ and LittleGlitterHouses.com™
Note from Editor: Glitterhouse designer/builder Howard Lamey uses floral picks to make bare-looking trees for his villages of vintage-style cardboard structures. This is how he explained it to me.
Winter Trees from Floral PicksHere's an easy way to use winter trees to add another layer of texture and color to your Christmas village or putz (cardboard house village). And they only cost about fifty cents each to make.
I use artificial flower "picks" from a craft store or dollar store. Look for picks that would have a believable branch structure when the flowers are removed. The “craft store” picks I used were on sale for 50-cents each and the “dollar store” picks were two on a card for $1.
On many picks, there are barbs on each branch tip to hold on the petals, leaves, or other trim. Pull off the petals, leaves or other trim. If the branch tips come off, too, put them back on after you've separated them from their foilage. In the picks shown at the right, it was easiest just to clip off the round balls.
On most picks, you'll also need to clip off the barbs on the branch tips. (Note: When making a "flower pick" tree for a Halloween setting, Harold leaves the barbs on. Click here to see an example of a project that included such a tree.)
Trim the excess off the bottom end of the picks to make them shorter.
Preparing the BaseCut a piece of stiff cardboard into an oval, triangle, circle or square. Mine were cut into a free-form design with gentle curves and no sharp points.
FinishingPrime the base with flat white wall paint. You may need 2 coats since the cardboard and end grain of the dowel will soak up much of the first coat.
When the primer is dry, spray paint the trunk and branches with a “mist” of white, tan, gray, light blue, silver or gold. You can even spray them a solid color to fit in with your color scheme. Cover the white base with a rag while you spray the trunk and branches.
Coat the cardboard and wooden dowel base with white glue and sprinkle on the clear glitter.
Remember, these still have pointy wire tips, so don't let small children play with them. But you can play with them all you want. In the photo to the right, Howard has posed them behind a different house.
How the base is finished depends on what the rest of the house looks like. If the house is set in a season other than winter, you may want to paint the base with a different colored topcoat before you attach the house and accessories.
For another article on making trees for indoor trains and towns, check out our Easy Homemade Trees article.
Other Articles about Glitterhouse include:
Other Putz House Resources:
Note: Big Indoor Trains™, Big Train Store™, Family Garden Trains™, Big Christmas Trains™, Garden Train Store™, and Trains and Towns™ and HallowenTrains.com™ are trademarks of Breakthrough Communications (www.btcomm.com).
Spook Hill™ is a trademark of Howard Lamey. All information, data, text, and illustrations on this web site are Copyright (c) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012 by Paul D. Race. Reuse or republication without prior written permission is specifically
For more information, contact us.